Твердая трубка Monsoon из акрила 13/10мм (ID 3/8" OD 1/2") 4x61см - черный

2 406,35 Р
Код артикула: 59328
В наличии

Available in 8 colors and two sizes and manufactured from premium virgin PMMA for the look you want and the reliability you demand. Acrylic Hardline from Monsoon allows you to route your tube runs exactly where you want them and eliminates all those unsightly and expensive adapters, tube coils, etc. for the cleanest, most economical loop installations.

Compatible with all three styles of Monsoon Premium Hardline fittings featuring Hard/Lock, and with Monsoon economy push in style fittings.

Attention: The tube may, for manufacturing reasons have up to 30% deviation from the declared external diameter! Therefore, please glue the pipes with the specially developed acrylic adhesive of Monsoon (recommended accessory) in the ports so as to prevent easy removal of the pipes from the connections!

Available sizes:
13/10mm (ID 3/8" OD 1/2")
16/12mm (ID 1/2" OD 5/8")

Plasticizer free.
Available in 2 sizes and 8 beautiful colors.
Premium Virgin PMMA.
Available in 24" (61cm) four packs and 30" (77cm) single packs.

Общие характеристики
Внешний диаметр 13мм (1/2")
Внутренний диаметр 10мм (3/8")
Максимально допустимое рабочее давление 7 бар (при 20°C)
Рабочий диапазон температур от -20°C до 60°C
Материал Акрил
Штрихкод 7001153120594
Код производителя ATH-3812-4-BK
Производитель Monsoon
Примечание Товар поставляется только после полной предоплаты
Цвет черный
Вес 0.272 кг
UV-активный Нет
Длина 0.61 м
Рекомендуем посмотреть