Твердая трубка Alphacool HardTube 13/10мм (акрил) 40см

Код артикула: 59308
В наличии

The HardTube project becomes a reality. Alphacool takes a completely new way and clearly sets!

The method most commonly used previously for water cooling systems is normal PVC hoses - now Alphacool offers another approach to water cooling. The Alphacool HardTube again brings more tidiness into the system which makes a much more structured impression.

Brand new plexi tubes with the Alphacool HT connectors make installation very simple, they connect completely sealed together. The plexi tube can be adapt to the system with the appropriate bending tool without needing to use additional angles.

The following options are available:

HardTube 13/10mm Clear Plexi 20cm, 40cm, 60cm und 80cm
HardTube 13/10mm brass chrome 20cm and 40cm
HardTube 13/10mm brass black chrome 20cm and 40cm
HardTube 16/12mm Clear Plexi 20cm, 40cm, 60cm und 80cm


Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort.

Scope of delivery:
1x 40cm Clear Plexi

Alphacool recommended for correct operation of the water cooling distilled water!

Общие характеристики 118, obshchie_kharakteristiki, divider, 0, 4
Внешний диаметр 13мм (1/2")
Внутренний диаметр 10мм (3/8")
Максимально допустимое рабочее давление 4 бар (при 20°C)
Рабочий диапазон температур от -20°C до 60°C
Материал Акрил
Штрихкод 4250197184205
Код производителя 18420
Производитель Alphacool
Примечание Товар поставляется только после полной предоплаты
Цвет прозрачный
Вес 0.042 кг
Длина 0.4 м
UV-активный Нет
Рекомендуемые товары
Рекомендуем посмотреть