Твердая трубка Alphacool HardTube 12/10мм (углеродное волокно) 20см

The HardTube project becomes reality. Alphacool is here entirely new way of tubing your system!
The method so far most commonly used for water cooling systems are the normal PVC hoses - now Alphacool offers another approach to tube your water cooling system. The HardTube variant brings a clean structured look to your system.
Brand new are the carbon tubes. Recommended for use with Alphacool HT connectors the carbon tube is 100% carbon made in Germany!
The carbon tube cannot be as bent like acrylic tube but must be cut to length and used with the matching elbows.
CAUTION: When cutting carbon tubes dust masks MUST be worn for health reasons.
The following versions are available:
HardTube 12 / 10mm Carbon 20cm
HardTube 12 / 10mm Carbon 40cm
HardTube 12 / 10mm Carbon 60cm
HardTube 12 / 10mm Carbon 80cm
Note: Due to production technical measures the lengths of the pipes may have a tolerance of 2mm.
Note: Due to the adjustment-made pipes the fittings must be plugged straight with a little effort.
Scope of supply:
1x HardTube 12 / 10mm Carbon 20cm
Notice
Alphacool recommended for correct operation of the water cooling distilled water!
Общие характеристики | 118, obshchie_kharakteristiki, divider, 0, 4 |
Внешний диаметр | 12мм (1/2") |
Внутренний диаметр | 10мм (3/8") |
Максимально допустимое рабочее давление | 4 бар (при 20°C) |
Рабочий диапазон температур | от -20°C до 60°C |
Материал | Углеродное волокно |
Штрихкод | 4250197184892 |
Код производителя | 18489 |
Производитель | Alphacool |
Примечание | Товар поставляется только после полной предоплаты |
Цвет | черный |
Вес | 0.1 кг |
Длина | 0.2 м |
UV-активный | Нет |
- 2 310,40 ₽
- 3 235,70 ₽
- Аксессуары для работы с твердыми трубками2 483,30 ₽