The reservoirs of the aqualis series feature a tube made from borosilicate glass, featuring, unlike the common Plexi reservoirs, very high hardness and scratch resistance paired with low thermal expansion and excellent chemical and thermal resistance.
An outer diameter of 75mm and a wall thickness of 5mm ensure high capacity and sturdiness of the reservoir. Bottom and top piece of the aqualis series reservoirs is made from Delrin, a nickel plated brass tube connects them.
The aqualis bases for pump adaptors are equipped with connection flanges at the bottom and can only be used with a suitable aqua computer pump adaptor!
Special features Item No. 45325, 45324 and 45342: Optionally two G1/4" threads with up to two lighting modules can be mounted (not included)
Special features Item No. 45340, 45332 and 45345: An optical highlight is the integrated water column effect: If the middle thread is used as the inlet, the coolant will flow through the brass tube to the top of the reservoir and exit via the eight openings, resulting in a great effect especially in combination with lighting. A thin Plexi plate near the bottom of the aqualis reduces the air intake into the cooling loop to a minimum. An additional Plexi window is integrated into the bottom piece, offering space for installation of up to six LEDs (type 5mm).
All 450ml versions are also available with a Nano coating which lets water drip off of the inner wall of the glass tube.
Dimensions: approx. 80 x 80 x 270mm
Coolant capacity: approx. 880 ml
Extent of delivery:
Two G1/4" screw plugs (pre-installed)
Please note: The reservoir can only be used in combination with a suitable pump adaptor, please order a suitable pump adaptor separately.
|Коннектор||Внутренняя резьба G1/4"|
|Размеры||80 × 80 × 185 мм|
|Примечание||Товар поставляется только после полной предоплаты|
|Отверстие для LED подсветки||Нет|
|Заливное отверстие (Fillport)||Нет|