Найти

Переходник для помп Eheim 1046 (выпускное отверстие) на внутреннюю резьбу G1/4" - шестиугольный

510,15 Р
Код артикула: 52137
Услуги:
В наличии

With this adaptor it is possible to use common G1/4" fittings on the Eheim 1046 pump. This adaptor can simply be screwed into the outlet of the Eheim 1046 pump replacing the original stout. (1/8" to 1/4" adaptor)

long & short:
Depending on which version is used this adaptor can be more handy to use with large fittings or smaller fittings / tubing sizes. But for both versions please always make sure not to overtighten the adaptor, screw it in only hand-tight under any circumstances to prevent damage to your pump!

Technical specifications:
Material: Nickel coated brass
Thread size: 1/4"

Extent of delivery:
Pump adaptor with durable O-ring

Please note: Do not insert the adaptor ''dry'' as the O-ring twists when dry and may not provide a safe seal. Therefore please moisten the O-ring before inserting the adaptor to prevent any problems.

Important: Over-tightening of this adaptor may result in breaking of the plastic shell. As soon as the O-ring has contact and the adaptor is lightly hand-tightened the seal is established!

Общие характеристики
Штрихкод 4049469092696
Производитель Aquatuning
Примечание Товар поставляется только после полной предоплаты
Вес 0.021 кг
Рекомендуем посмотреть